產品列表PRODUCTS LIST
如下為我司愛澤工業IZE_Industries本月到貨ACCU-CODER相關產品，歡迎致電索取樣本資料和產品信息。
ACCU-CODER編碼器711-0250-S-IND12-6-S-S-Y
ACCU-CODER編碼器725I-S-S-6000-Q-HV-5-F-1-SX-N-CE-SPEC711
ACCU-CODER編碼器725I-S-S-30000-Q-HV-5-F-1-SX-N-CE
ACCU-CODER編碼器260-N-T-02-S-3600-R-PP-1-K00-FB-2-N
ACCU CODER編碼器TR1-U1R4-1200NV1QPU-M00
ACCU-CODER編碼器711系列介紹
Accu-Coder® 711 型是業界標準的原始立方體編碼器。它與大多數可編程控制器、電子計數器、運動控制器和電機驅動器兼容，是需要單通道格式的簡單、對稱、單向方波輸出的應用的理想之選。針對分辨率，它具備關鍵的性能指標，并采用Opto-ASIC 電路——單芯片設計，省去了許多板級元件——進一步提升了這款原本就可靠耐用的編碼器的可靠性。隨著新功能的不斷推出，711 型編碼器在各種工業應用中都表現出色。
• 業界標準的原始立方體編碼器
• 五種多功能外殼樣式
• 單向輸出
• 分辨率可達 10,000 CPR
The Model 711 Accu-Coder® is the original, industry-standard cube encoder. Designed for compatibility with most programmable controllers, electronic counters, motion controllers, and motor drives, it is ideally suited for applications that require a simple, symmetrical, uni-directional square wave output in a single channel format. Critical performance specifications for the most popular resolutions and advanced Opto-ASIC circuitry — a single chip design that eliminates many board level components — increases the reliability of an already dependable and durable encoder. With new options continually being added, the Model 711 excels in a wide variety of industrial applications.
• The original industry-standard cube encoder
• Five versatile housing styles
• Unidirectional output
• Resolutions available to 10,000 CPR
ACCU-CODER編碼器725系列介紹
725 型 2.5 英寸 Accu-Coder® 光學軸編碼器專為應對工業環境的挑戰而設計，分辨率高達每轉 30,000 次。725 型編碼器提供法蘭和伺服兩種安裝方式，并有兩種不同的外殼樣式可供選擇：
標準外殼 (N)：
堅固耐用的標準外殼 (N) 可將內部電子元件與外部環境的沖擊和應力隔離開來。
工業外殼 (I)：
超重型工業外殼 (I) 采用隔離的內部編碼器單元。這種隔離設計利用內部柔性安裝座保護編碼器免受嚴重的軸向和徑向軸載荷，從而延長軸承壽命。對于承受持續側向載荷的應用，例如使用測量輪、皮帶輪或鏈輪驅動編碼器的應用，工業外殼是推薦的解決方案。
• 標準尺寸 25 封裝 (2.5 英寸 x 2.5 英寸)
• 高達每轉 30,000 次
• 標準外殼和工業外殼
• 伺服安裝法蘭安裝
• 提供 IP67 防護等級
• 提供超重型工業外殼
The Model 725 2.5" Accu-Coder® optical shaft encoder is specifically designed for the challenges of an industrial environment offering resolutions up to 30,000 cycles per revolution. The Model 725 offers both flange and servo mounting options, and is available in two distinctive housing styles:
Standard Housing (N):
The rugged Standard Housing (N) isolates the internal electronics from the shock and stress of the outer environment.
Industrial Housing (I)
The extra-heavy-duty Industrial Housing (I) features a fully isolated internal encoder unit. That isolation prolongs bearing life by using an internal flexible mount to protect the encoder from severe axial and radial shaft loading. The Industrial Housing option is the recommended solution for applications subject to continuous side loads, such as those that drive the encoder with a measuring wheel, pulley, or chain and sprocket.
• Standard Size 25 package (2.5" x 2.5")
• Up to 30,000 CPR
• Standard and industrial housings
• Servo and flange mounting
• IP67 sealing available
• Available with extra-heavy-duty industrial housing
ACCU-CODER編碼器260系列介紹
260 型編碼器擁有更大的孔徑（可達 0.625 英寸）和低矮的外形，是眾多機械和電機應用的理想之選。260 型編碼器提供兩種不同的規格——盲孔式和通孔式——并采用 EPC 的創新型 Opto-ASIC 設計。此外，260 型編碼器還采用了 EPC 的創新型防反沖安裝系統，可實現簡單、可靠且精確的編碼器安裝。與傳統的套件式或模塊化編碼器設計不同，其集成軸承組可提供穩定一致的運行，無需擔心軸向或徑向軸跳動。對于無刷伺服電機應用，260 型編碼器可配置三個 120° 電氣相軌，以提供高達 12 極的換向反饋?？蛇x的擴展溫度范圍允許伺服電機在高功率輸出和占空比下運行。
• 低矮外形，1.19 英寸
• 高達 12 極的換向
• 通孔式和盲孔式兩種規格
• 簡單、創新的靈活安裝系統
• 集成 Opto-ASIC技術
• 可提供 CE 認證
The Model 260’s larger bore (up to 0.625") and low profile make it the perfect solution for many machine and motor applications. Available in two distinct formats – a blind hollow bore and a complete thru-bore – the Model 260 uses EPC’s pioneering Opto-ASIC design. The Model 260 also uses EPC’s innovative anti-backlash mounting system, allowing simple, reliable, and precise encoder attachment. Unlike traditional kit or modular encoder designs, its integral bearing set provides stable and consistent operation without concerns for axial or radial shaft runout. For brushless servo motor applications, the Model 260 can be specified with three 120° electrical phase tracks to provide up to 12-pole commutation feedback. The optional extended temperature capability allows servo motors to operate at higher power outputs and duty cycles.
• Low profile 1.19"
• Up to 12-pole commutation
• Thru-bore and blind hollow bore styles
• Simple, innovative flexible mounting system
• Incorporates Opto-ASIC technology
• CE marking available
ACCU-CODER編碼器TR1系列介紹
Tru-Trac® TR1 型線性測量解決方案是一款用途廣泛的測量設備，可用于在各種表面上跟蹤速度、位置或距離。TR1 型將編碼器、測量輪和彈簧式扭力臂集成在一個緊湊的單元中，安裝簡便。彈簧式扭力臂提供可調節的扭力負載，使 TR1 型幾乎可以以任何方向安裝——即使是倒置安裝。樞軸上的螺紋軸可在現場反轉，方便從兩側進行安裝。TR1 型 Tru-Trac® 的運行速度高達每分鐘 3000 英尺，提供多種配置選項（包括多種輪子材料選擇），并且外殼采用耐用的導電復合材料制成，可一定限度地減少靜電積聚，是眾多應用的優選。
• 編碼器、測量輪和彈簧式扭力臂集成于一個緊湊的單元中
• 彈簧式扭力臂使輪壓調節變得輕而易舉
• 可輕松垂直、水平或倒置安裝
• 可在多種表面上以高達每分鐘 3000 英尺的速度運行
• 集成模塊簡化了系統設計，降低了成本
The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation – even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options – including multiple wheel material options – and a housing made from a durable, conductive composite material that minimizes static build up, the Model TR1 Tru-Trac® is the ideal solution for countless applications.
• Encoder, measuring wheel & spring loaded torsion arm integrated into one compact unit
• Spring-loaded torsion arm makes wheel pressure adjustments a snap
• Easily installed in a vertical, horizontal or upside down orientation
• Operates over a variety of surfaces at speeds up to 3000 feet per minute
• Integrated module simplifies your system design, reducing cost
ACCU-CODER編碼器常用型號：
ACCU-CODER 15H-14SF-0100NV1RPP-F06-CE
ACCU-CODER 15S-23M3-0100NV1APU-J00
ACCU-CODER 15T-01SF-2000N5RHV-K00
ACCU-CODER 1852662 225A-34-0060-PU-F-N-J
ACCU-CODER 25SP-38MA-A1000B5HV-SMK-S3
ACCU-CODER 25T-34SJ-1024NV1DHV-SMX-S3
ACCU-CODER 25TC-05SG-1200NV1R3PP-SMK-S3CE
ACCU-CODER 260-N-R-02-S-1024-Q-HV-1-S/15.00-SF-2
ACCU-CODER 260-N-T-02-S-3600-R-PP-1-K00-FB-2-N
ACCU-CODER 2760967 ,260-N-R-02-S-1024
ACCU-CODER 711-0020-S-S-6-D-S-N
ACCU-CODER 711-0120-S-S-6-S-S-Y
ACCU-CODER 711-0250-S-IND12-6-S-S-Y
ACCU-CODER 711-0600-S-S-6-S-S-N
ACCU-CODER 716-0120-HV-S-4-S-S-Y
ACCU-CODER 725I-S-S-0500-Q-HV-1-F-N-SX-Y-N
ACCU-CODER 725I-S-S-1000-R-OC-1F-N-S-Y
ACCU-CODER 725I-S-S-1500-Q-HV-1-S-1-SY-Y-N
ACCU-CODER 725I-S-S-2540-Q-HV-2-F-1-SX-N-CE
ACCU-CODER 725I-S-S-30000-Q-HV-5-F-1-SX-N-CE
ACCU-CODER 725I-S-S-5000-Q-HV-1-F-N-SY-Y-N
ACCU-CODER 725I-S-S-6000-Q-HV-5-F-1-SX-N-CE
ACCU-CODER 725I-S-S-6000-Q-HV-5-F-1-SX-N-CE-SPEC711
ACCU-CODER 725N-S-S-0200-Q-PU-1-F-1-SG/01.30-N-N S491
ACCU-CODER 725N-S-S-5000-Q-HV-5-F-N-SY-Y-CE
ACCU-CODER 770AH1000-QHVDPYNN
ACCU-CODER 776-A-H-1024-R-HV-I-X-A-Y-N
ACCU-CODER SL-770AH0250-QHVDPYNN
ACCU-CODER TR1-U1L4-1200NV1RHV-K00
ACCU-CODER TR1-U1R4-1000NV1QHV-K00-S2CE
ACCU-CODER TR1-U1R4-1000NV1QPP-J00
ACCU-CODER TR1-U1R4-1200NV1QPU-M00
ACCU-CODER TR1-U1R4-1800NV1RPU-J00
ACCU-CODER TR1-U1R4-2048NV1RHV-K00
ACCU-CODER TR1-U1R6 7200NV1RHV-M00
ACCU-CODER TR1-U1R6-1800NV1QPP-J00-S2
如果您需要完整的ACCU-CODER的相關技術咨詢，請隨時致電愛澤工業，或者訪問網站,我們將盡全力解決您的問題。
If you have any question for ACCU-CODER，please feel free to dial or browse our website.
